Mazda Buyers Guide

 

 2003 Mazda Tribute DX 4X4

*
MSRP: $19,900
Invoice: $18,596

Gas Mileage:
CTY: N/A    HWY: N/A    CMB: N/A
Engine/Fuel: 4 Cyl
Transmission:
Door/Body Style: /SUV, sport utility vehicle
Drive Type:

Prices/Warranty

See the prices and various warranties offered.
  • General
  • MSRP: $19,900
  • Invoice Price: $18,596
  • Destination Charge: $0
  • Warranty
  • Basic (Month):  
  • Basic (Mileage):  
  • Powertrain (Month):  
  • Powertrain (Mileage):  
  • Rust (Month):  
  • Rust (Mileage):  

Engine & Emissions

View engine and emission data on this vehicle.
  • Engines & Emissions
  • 1989 cc 2 liters in-line 4 front engine with 84.8 mm bore, 88 mm stroke, 9.6 compression ratio, double overhead cam and four valves per cylinder
  • 58 liter 15.3 gallon main unleaded fuel tank
  • Emission control level FED
  • Fuel economy
  • Multi-point injection fuel system
  • Unleaded fuel
  • Engine
  • Compression ratio: 9.6
  • Cylinders: 4
  • RPM @ Peak Horsepower: 130

Dimensions

See the interior and exterior dimensions.
  • Exterior Dimensions
  • Overall Length (in): 173
  • Overall Width (in): 70.8
  • Overall Height (in): 69.3
  • Wheelbase (in): 103.1
  • Curb weight (lbs): 3245
  • Curb weight (lbs): 1472
  • Interior Dimensions
  • Headroom front (in): 40.3
  • Headroom rear (in): 38.9
  • Hip room front (in): 53.3
  • Hip room rear (in): 48.8
  • Leg room front (in): 41.7
  • Leg room rear (in): 36.9
  • Shoulder room front (in): 55.9
  • Shoulder room rear (in): 55.7

Features

See the features of this vehicle.
  • Exterior
    • Black front and rear bumpers
    • Body side molding
    • Complex surface lens halogen bulb headlights
    • Delayed/fade courtesy lights
    • Gloss paint , black paint , metallic paint
    • Headlight control with time delay switch-off
  • Heating, Ventilation & Air Conditioning
    • Air conditioning
    • Ventilation system
  • Entertainment, Communication & Navigation
    • Audio system with AM/FM radio and CD player
    • Fixed mast antenna
    • Four speakers
  • Instrumentation
    • Clock
    • Door ajar warning
    • Low fuel level warning
    • Tachometer
  • Sunroof/Moonroof & Removeable/Convertible Top
    • Roof rails
  • Wheels & Tires
    • External dimensions: overall length (mm): 4394, overall length (inches): 173, overall width (mm): 1798, overall width (inches): 70.8, overall height (mm): 1760, overall height (inches): 69.3, ground clearance (mm): 201, ground clearance (inches): 7.9, wheelbase (mm): 2619, wheelbase (inches): 103.1, front track (mm): 1539, front track (inches): 60.6, rear track (mm): 1519, rear track (inches): 59.8, curb to curb turning circle (mm): 10790 and curb to curb turning circle (feet): 35.4
    • Front and rear alloy wheels with 16 inch rim diam and 6.5 inch rim width
    • Front and rear tires with 215 mm tire width, 70% tire profile, S tire rating and black sidewall
    • Part-time 4x4-wheel drive
    • Spacesaver steel rim internal spare wheel
  • Windows, Mirrors & Wipers
    • Driver and passenger power black door mirrors
    • Driver and passenger vanity mirror
    • Front power windows with one one-touch , rear power windows
    • Heat reflective glass
    • Hinge rear window with defogger and intermittent
    • Rear view mirror
    • Tinted glass on cabin , privacy tinted glass on rear , privacy tinted glass on side
    • Windshield wipers with variable intermittent wipe

Safety Features

View the built in safety features included.
  • Safety Features
  • Driver and passenger front airbag
  • Two height adjustable head restraints on front seats
  • Anti-Theft
  • Immobilizer
  • Braking & Traction
  • Two disc brakes including two ventilated discs

Read Reviews

Expert opinions you can trust.

*Fuel Economy Guide

Research the yearly spend on gasoline for every Mazda in our database.

 

*NHTSA Test Results

Get crash test results, service bulletins, and product recalls for every Mazda model.
  • Click a car name to see the crash test details for that model.

     

     

    Crash Test Data for 2003 Mazda

    Mazda Vehicle Front Star Rating Side Star Rating Rollover Resistance Rating
    Driver Passenger Front Seat Rear Seat
    2003 B-SeriesNot
    Tested
    2003 B-SeriesNot
    Tested
    2003 Mazda6
    2003 Miata MX-5Not
    Tested
    2003 MPV
    2003 ProtegeNot
    Tested
    Not
    Tested
    Not
    Tested
    Not
    Tested
    Not
    Tested
    2003 Protege
    2003 Tribute

     

    Service Bulletins for 2003 Mazda

    2003 MAZDA 626
    Bulletin Number: 0100303
    FRONT CRANKSHAFT BOLT SERVICE WARNING. *TT
    Bulletin Number: 0900104
    PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR
    2003 MAZDA B-SERIES TRUCK
    Bulletin Number: 00-001-13-2748
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 00-001-13-2748A
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 00-001-18-3446
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
    Bulletin Number: 00-001-18-3446a
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
    Bulletin Number: 00-001-19-3560
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
    Bulletin Number: 00-002-14-2936
    MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE
    Bulletin Number: 00-002-19-3561
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
    Bulletin Number: 00-003-18-3480
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro
    Bulletin Number: 00-003-18-3480a
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
    Bulletin Number: 00-003-19-3583
    In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
    Bulletin Number: 00-004/12
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 00-004-12-2741
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 0004080
    EXCESSIVE STEERING VIBRATION AT IDLE. *TT
    Bulletin Number: 0004110
    A LOUD ACCESSORY DRIVE BELT SQUEAL AND/OR CHIRP UNDER ALL DRIVING CONDITIONS ON CERTAIN VEHICLES BUILT PRIOR TO 09/18/03. REPAIR INFORMATION REVIEW1. 2004 MODELS ALSO INCLUDED. *TT
    Bulletin Number: 0004123
    B28 AND LATER PCM CALIBRATION UPDATE INFORMATION. REPAIR INFORMATION REVIEW1. *TT
    Bulletin Number: 0004164
    SPARK KNOCK, DETONATION OR PING CONDITION THROTTLE TIP-IN OR DURING STEADY STATE OPERATION AT OR NEAR WIDE OPEN THROTTLE ON CERTAIN VEHICLES EQUIPPED WITH 3.0L FFV/EFI ENGINES. REPAIR INFORMATION REVIEW1. *TT
    Bulletin Number: 00307
    AVAILABILITY OF NON-REQUIRED TOOLS. *KB
    Bulletin Number: 01-001-19-3551
    This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
    Bulletin Number: 01-002-19-3552
    The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
    Bulletin Number: 0100303
    FRONT CRANKSHAFT BOLT SERVICE WARNING. *TT
    Bulletin Number: 0100304
    3.0L LOWER ENGINE OIL LEAKS- DIAGNOSTIC-SERVICE TIP. *JB TT
    Bulletin Number: 01-004-19-3558
    On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
    Bulletin Number: 01-008-18-3451
    This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
    Bulletin Number: 01-009-18-3452
    The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
    Bulletin Number: 0101505
    FRONT CRANKSHAFT BOLT SERVICE WARNING. *MJ INCLUDING 2005 MAZDA B2300 AND 2005 MAZDA6. (UPDATE) *SC
    Bulletin Number: 0101505
    FRONT CRANKSHAFT BOLT SERVICE WARNING. *SC
    Bulletin Number: 01-016-18-3522
    On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
    Bulletin Number: 0102206
    FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ
    Bulletin Number: 0102504
    BATTERY TEST PROCEDURE REQUIREMENTS. *TT
    Bulletin Number: 0102604
    ROUGH IDLE AND/OR 1800-2200 RPM BOOM/VIBRATION. *TT
    Bulletin Number: 0103003
    A MALFUNCTION INDICATOR LAMP (MIL) WITH DIAGNOSTIC TROUBLE CODE (DTC) P0442, P0455, P0456, P0457 OR P1442 OR A CHECK FUEL CAP LIGHT ILLUMINATED WITH DTC P0457. VARIOUS MODELS INCLUDING THE 2005 TRIBUE AND 2004 B-SERIES. *TT
    Bulletin Number: 0104404
    OIL LEAK FROM OIL FILTER ADAPTER. *TT
    Bulletin Number: 02-001-13-2752
    SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH
    Bulletin Number: 02-001-19-3550
    Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
    Bulletin Number: 02-006-18-3449
    Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
    Bulletin Number: 0300104
    THUMP / CLUNK FROM DRIVELINE ON LIGHT ACCELERATION OR WHEN STOPPING. *TT
    Bulletin Number: 0300303
    4WD-B-SERIES-THUMPING NOISE/BUMPING SENSATION ACCERLERATING FROM A STOP. *MN *TT
    Bulletin Number: 0400504
    GRABBING CONDITION FROM REAR DRUM BRAKES. *TT UPDATED 4/25/08. *NJ
    Bulletin Number: 05-001-16-3128
    ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
    Bulletin Number: 05-001-18-3453
    Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
    Bulletin Number: 05-002-13-2777
    ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
    Bulletin Number: 05-002-13-2777A
    ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
    Bulletin Number: 0500503
    TRANSMISSION FLUID IN-LINE FILTER KIT - REPEAT REPAIRS OF TRANSMISSION - SERVICE TIPS. *TT
    Bulletin Number: 0600102
    CLICKING NOISE WHILE TURNING THE STEERING WHEEL. *TT THIS BULLETIN REPLACES PREVIOUS BULLETIN 06-001-02 DATED 6/18/2002. *TT
    Bulletin Number: 06012004
    PROGRAMMABLE MODULE INSTALLATION. ( 2004 MAZDA B SERIES) *JB
    Bulletin Number: 06012004
    SPARE TIRE/WHEEL SIZE CHANGE. (2004 MAZDA B SERIES) *JB
    Bulletin Number: 0800203
    SAFETY BELT PRETENSIONER DIAGNOSTIC TROUBLE CODE B1877 / LFC 46 AND / OR DIAGNOSTIC TROUBLE CODE B1881 / LFC 47. *TT
    Bulletin Number: 0800306
    NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB
    Bulletin Number: 0800405
    SAFETY BELT RETRACTS TOO SLOWLY. MAZDA INCLUDING 2006 B-SERIES TRUCKS. *SC
    Bulletin Number: 08022004
    DEALER NOTICE - SERVICE BULLETIN RELEASE. *TT
    Bulletin Number: 08042004
    DEALER NOTICE - SERVICE BULLETIN RELEASE - 08/04/2004. *TT
    Bulletin Number: 09-002-19-3554
    This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro
    Bulletin Number: 0900504
    BED EXTENDER COMPONENT REPLACEMENT AND REMOVAL/ INSTALLATION INSTRUCTIONS. ALSO INCLUDING THE 2004 MAZDA B-SERIES.*MR
    Bulletin Number: 09-005-13-2781
    THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH
    Bulletin Number: 09-005-19-3562
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-
    Bulletin Number: 0900805
    BRAKE LAMPS INOPERATIVE-CHECK CENTER HIGH MOUNTED STOP LAMP (CHMSL)-SERVICE TIP. *SC
    Bulletin Number: 09-009-19-3566
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 090104
    UPPER CONTROL ARM CHANGE. *JB
    Bulletin Number: 0901202
    PASSIVE ANTI-THEFT (PATS) DIAGNOSTIC SERVICE TIPS. *TT
    Bulletin Number: 09-014-18-3443
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
    Bulletin Number: 09-014-18-3443a
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-
    Bulletin Number: 0901703
    ELECTRICAL - WIRING - SOLDERING AND CRIMPING REPAIRS - SERVICE TIP. *TT
    Bulletin Number: 09-019-18-3450
    This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
    Bulletin Number: 0902004
    EXTERIOR MIRROR GLASS AND MOTOR REPLACEMENT GUIDELINES. *MJ
    Bulletin Number: 0902604
    SPEEDOMETER REPLACEMENT PROCEDURE. *TT
    Bulletin Number: 09-027-14-2935
    THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P
    Bulletin Number: 09-034-14-2956
    IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO
    Bulletin Number: 09-034-18-3430
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 09-034-18-3430a
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 09-035-17-3080
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co
    Bulletin Number: 53
    FIRESTONE WILDERNESS AT TIRE REPLACEMENT SPP 53 PROGRAM END. MAZDA HAS REVISED THE EXPIRATION DATE FOR SPECIAL SERVICE PROGRAM (SSP) 53 TO SEPTEMBER 15, 2004. THIS CHANGE IS TO ENSURE THAT ALL CUSTOMERS HAVE AFFECTED TIRES REPLACED. *T
    Bulletin Number: 53
    FIRESTONE WILDERNESS AT TIRE REPLACEMENT SSP 53 PROGRAM END. SSP 53 ENDS SEPTEMBER 13, 2004. THIS COMMUNICATION AND THE ATTACHMENTS PROVIDE UPDATED PROGRAM END INFORMATION. *TT
    Bulletin Number: 53
    WILDERNESS AT TIRE REPLACEMENT PROGRAM END WITH ATTACHED UPDATES AND PROGRAM CHANGES. *TT
    Bulletin Number: SA-038-18
    Some vehicles may have a check engine light on with a DTC P2004 (Intake Manifold Runner Control Stuck Open) stored in memory. This DTC is set when the IMRC is commanded closed, but the IMRC indicates open.
    Bulletin Number: SA-061-17
    In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En
    Bulletin Number: SB-09-005-13
    MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE
    2003 MAZDA MAZDA
    Bulletin Number: 0102902
    SULFUR SMELL FROM EXHAUST SYSTEM. *TT
    2003 MAZDA MAZDA6
    Bulletin Number: 00-001-13-2748
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 00-001-13-2748A
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 00-001-18-3446
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
    Bulletin Number: 00-001-18-3446a
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
    Bulletin Number: 00-001-19-3560
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
    Bulletin Number: 00-002-14-2936
    MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE
    Bulletin Number: 00-002-19-3561
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
    Bulletin Number: 00-003-18-3480
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro
    Bulletin Number: 00-003-18-3480a
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
    Bulletin Number: 00-003-19-3583
    In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
    Bulletin Number: 00-004/12
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 00-004-12-2741
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 00-004-16-3237
    RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNERS MANUAL.
    Bulletin Number: 0004123
    B28 AND LATER PCM CALIBRATION UPDATE INFORMATION. REPAIR INFORMATION REVIEW1. *TT
    Bulletin Number: 00204
    EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH
    Bulletin Number: 00307
    AVAILABILITY OF NON-REQUIRED TOOLS. *KB
    Bulletin Number: 01-001-19-3551
    This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
    Bulletin Number: 01-002-18-3417
    Some vehicles may have a MIL illumination with DTC's P0441, P0442, P0455, or P0456 stored in memory. To determine the location of the evaporative system leak, follow the repair procedure below. P0441 - Evaporative emission control system in
    Bulletin Number: 01-002-19-3552
    The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
    Bulletin Number: 0100303
    FRONT CRANKSHAFT BOLT SERVICE WARNING. *TT
    Bulletin Number: 01-003-15-3014
    USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS.
    Bulletin Number: 01-004-19-3558
    On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
    Bulletin Number: 0100803
    OIL FILTER CARTRIDGE REMOVAL. *TT ENGINE OIL FILTER CARTRIDGE HOUSING COVER DAMAGE. *TT
    Bulletin Number: 01-008-18-3451
    This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
    Bulletin Number: 0100907
    ENGINE NO START DUE TO FROZEN MAIN RELAY/FUEL PUMP RELAY. *KB
    Bulletin Number: 01-009-18-3452
    The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
    Bulletin Number: 010104
    DURING ASSEMBLY A LUBRICANT USED TO EASE THE INSTALLATION OF THE DOOR WEATHER-STRIP CAUSED STAINING OVER THE CLEAR COAT ON THE DOOR SASHES. SPECIAL SERVICE PROGRAM (SSP) 57. *NM
    Bulletin Number: 01012004
    INTERFERENCE ENGINE. MAZDA M-TIPS. *TT
    Bulletin Number: 01012004
    MODULE CONFIGURATION. MAZDA M-TIPS. *TT
    Bulletin Number: 01012006
    CENTER PANEL REMOVAL CAUTION. *TT
    Bulletin Number: 0101505
    FRONT CRANKSHAFT BOLT SERVICE WARNING. *MJ INCLUDING 2005 MAZDA B2300 AND 2005 MAZDA6. (UPDATE) *SC
    Bulletin Number: 0101505
    FRONT CRANKSHAFT BOLT SERVICE WARNING. *SC
    Bulletin Number: 01-015-13
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 01-015-13-2796
    SOME VEHICLES MAY EXPERIENCE A MIL ILLUMINATION WITH DTC P2135 STORED IN MEMORY OR DTCS P0123 AND/OR P0222 STORED AFTER THE THROTTLE BODY HAS BEEN REPLACED. DTC P2135: THROTTLE POSITION SENSOR NO.1 / NO. 2 VOLTAGE CORRELATION DTC P0123:
    Bulletin Number: 01-015-13-2796A
    SOME VEHICLES MAY EXPERIENCE A MIL ILLUMINATION WITH DTC P2135 STORED IN MEMORY OR DTCS P0123 AND/OR P0222 AFTER THE THROTTLE BODY HAS BEEN REPLACED.DTC P2135: THROTTLE POSITION SENSOR NO.1 / NO. 2 VOLTAGE CORRELATIONDTC P0123: THROTTLE P
    Bulletin Number: 01-016-16-3220
    THERE IS A CONCERN THAT SOME WATER PUMPS ARE BEING REPLACED THAT ARE NOT FAULTY, DUE TO SIGNS OF A VERY SMALL COOLANT LEAK FROM THE BLEED HOLE. THIS SERVICE BULLETIN IS TO INFORM YOU ABOUT THE WATER PUMP SEALING MECHA-NISM AND THE CRITERIA
    Bulletin Number: 01-016-18-3522
    On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
    Bulletin Number: 0101805
    UNUSUAL NOISE FROM DRIVE BELT AUTO TENSIONER. *TT
    Bulletin Number: 0101903
    MALFUNCTION INDICATOR LAMP ILLUMINATION WITH DIAGNOSTIC TROUBLE CODE P0300 - P0304. *TT
    Bulletin Number: 0102003
    ENGINE CRANKS BUT NO START - SETS DIAGNOSTIC TROUBLE CODE (DTC) P0335. *TT
    Bulletin Number: 0102004
    HESITATION / ROUGH IDLE AT HIGH ALTITUDE. *MJ
    Bulletin Number: 0102206
    FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ
    Bulletin Number: 0102503
    MALFUNCTION INDICATOR LAMP ILLUMINATION WITH DIAGNOSTIC TROUBLE CODE P2227. *TT
    Bulletin Number: 0102504
    BATTERY TEST PROCEDURE REQUIREMENTS. *TT
    Bulletin Number: 0103104
    MALFUNCTION INDICATOR LAMP ILLUMINATION WITH DIAGNOSTIC TROUBLE CODE P2110 - THROTTLE ACTUATOR CONTROL SYSTEM. *TT
    Bulletin Number: 0103204
    SURGING WHILE CRUISING AT 40- 50 MPH. *TT
    Bulletin Number: 0103304
    MALFUNCTION INDICATOR LAMP ILLUMINATION WITH DIAGNOSTIC TROUBLE CODES P2404 AND/OR P0456. *TT
    Bulletin Number: 0104004
    ROUGH IDLE / ENGINE STALL DURING COLD START AT NORMAL AMBIENT TEMPERATURE. *TT
    Bulletin Number: 0104406
    MALFUNCTION INDICATOR LIGHT ON WITH DTC P0106. *KB
    Bulletin Number: 02-001-13-2752
    SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH
    Bulletin Number: 02-001-19-3550
    Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
    Bulletin Number: 0200304
    POPPING / CLUNKING NOISE FROM THE FRONT SUSPENSION. *TT
    Bulletin Number: 02-004-13-2770
    SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
    Bulletin Number: 02-004-13-2770A
    SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
    Bulletin Number: 02-004-13-2770B
    SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
    Bulletin Number: 02-004-14
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 02-004-14-2976
    SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. FOLLOW STEERING WHEEL ALIGNMENT PROCEDURE.
    Bulletin Number: 02-004-19-3574
    Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road.
    Bulletin Number: 0200606
    STEERING PULL/DRIFT-IMPROVED DIAGNOSTIC AND REPAIR PROCEDURES. *KB
    Bulletin Number: 02-006-18-3449
    Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
    Bulletin Number: 02-009-16-3155
    SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
    Bulletin Number: 02-010-18-3477
    Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road.
    Bulletin Number: 032404
    DEALER NOTICE - SERVICE BULLETIN RELEASE (03/24/04). MAZDA *TT
    Bulletin Number: 04-002-19-3545
    Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
    Bulletin Number: 0400404
    BRAKE JUDDER AND/OR BRAKE MOAN NOISE. *TT THIS BULLETIN SUPERSEDES THE PREVIOUS BULLETIN ISSUED ON 07/01/04. *TT
    Bulletin Number: 04-004-13-2853
    Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
    Bulletin Number: 04-004-14-2926
    SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR,
    Bulletin Number: 04-004-16-3160
    SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR,
    Bulletin Number: 04-004-18-3468
    Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
    Bulletin Number: 0419
    REPLACING THE SPOILER FOAM PROTECTORS ON CERTAIN 5-DOOR MODELS WHEN THERE IS SIGNIFICANT DAMAGE TO THE DECK LID. *TT
    Bulletin Number: 0420
    REPLACING THE SPOILER FOAM PROTECTORS ON MAZDA6 SPORTS SEDAN WHEN THERE IS SIGNIFICANT DAMAGE TO THE DECK LID. PARTS FLASH. *TT
    Bulletin Number: 0421
    REPLACING SPOILER FOAM PROTECTORS WHEN THERE IS SIGNIFICANT DAMAGE TO THE DECK LID. PARTS FLASH. MAZDA6 SPORT WAGON. *TT
    Bulletin Number: 05-001-16-3128
    ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
    Bulletin Number: 05-001-18-3453
    Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
    Bulletin Number: 05-002-13-2777
    ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
    Bulletin Number: 05-002-13-2777A
    ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
    Bulletin Number: 0500505
    1-2 SHIFT LOCK. *SC
    Bulletin Number: 0500906
    1-2 SHIFT SHOCK (TRANS RELEARN PROCEDURE DELETED). VEHICLES WITH AUTOMATIC TRANSMISSIONS. *KB
    Bulletin Number: 06012004
    EXHAUST SYSTEM CHIRP/SQUEAK NOISE. *JB
    Bulletin Number: 06012004
    PROGRAMMABLE MODULE INSTALLATION. ( 2004 MAZDA B SERIES) *JB
    Bulletin Number: 0700105
    FOGGING ON LOWER EXTERIOR OF WINDSHIELD. *TT
    Bulletin Number: 07-002-13-2842
    A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS
    Bulletin Number: 07-002-18-3432
    A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c
    Bulletin Number: 07-002-19-3616
    A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is
    Bulletin Number: 0800306
    NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB
    Bulletin Number: 08-003-17-3345
    Mazda Motor Corporation is going to evaluate the following inflators to ensure the safety of the inflator with a desiccant. In order to do this, MNAO is collecting inflators for evaluation in certain zones. For 2003-2008 Mazda6 (including M
    Bulletin Number: 08132004
    DEALER NOTICE - SERVICE BULLETIN RELEASE - 08/13/2004. *TT
    Bulletin Number: 0900104
    PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR
    Bulletin Number: 09-001-19-3553
    When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as so
    Bulletin Number: 0900205
    FRONT TURN SIGNALS INOPERATIVE. *TT ORIGINAL. *TT
    Bulletin Number: 09-002-19-3554
    This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro
    Bulletin Number: 0900304
    ELECTROCHROMIC MIRROR W/ COMPASS & HOMELINK INSTALLATION CAUTION. *MR
    Bulletin Number: 09-003-16-3130
    SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT (HEADLAMP/HEADLIGHT) OR REAR (TAILLAMP/TAIL-LIGHT) COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMP-TOM TO BE MORE NOTICEA
    Bulletin Number: 09-003-19-3555
    Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
    Bulletin Number: 0900403
    REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE. *TT
    Bulletin Number: 09-005-13-2781
    THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH
    Bulletin Number: 09-005-19-3562
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-
    Bulletin Number: 0900705
    IMPROPER SEAT WARMER OPERATION. *TT
    Bulletin Number: 09-007/08
    HEADLIGHT LENS CONDENSATION OR WATER ENTRY - (NOT APPLICABLE TO MAZDASPEED6). *NJ
    Bulletin Number: 09-007-14-2878
    SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM
    Bulletin Number: 09-008-17-3324
    Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by Mazda's New Vehicle Limit
    Bulletin Number: 0900904
    MODULAR AUDIO SYSTEM - CENTER PANEL MODULE REMOVAL CAUTION. *TT
    Bulletin Number: 09-009-19-3566
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 090104
    PCM REPLACEMENT. *JB
    Bulletin Number: 09-011-18-3448
    Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
    Bulletin Number: 09-012-14-2891
    WHEN REPLACING THE SIRIUSXM SATELLITE RADIO UNIT (OR A MAZDA CONNECT TUNER AND AMP UNIT (TAU)) WITH REPLACEMENT TUNER FOR ANY REASON, A CALL MUST BE MADE TO INFORM SIRIUSXM OF THE EXISTING RADIO ID AND THE NEW/ REPLACEMENT SAT RADIO ID AS S
    Bulletin Number: 09-014-18-3443
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
    Bulletin Number: 09-014-18-3443a
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-
    Bulletin Number: 09-018-13-2803
    SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE. WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER
    Bulletin Number: 09018173351
    Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature. When you encounter a customer with this concern, first verify the condition when the customer
    Bulletin Number: 09-019-18-3450
    This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
    Bulletin Number: 0902103
    DOORS HARD TO CLOSE IN EXTREMELY COLD WEATHER. *TT
    Bulletin Number: 09-023-14-2924
    SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE.WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER
    Bulletin Number: 09-023-18-3475
    When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as so
    Bulletin Number: 0902604
    SPEEDOMETER REPLACEMENT PROCEDURE. *TT
    Bulletin Number: 09-027-14-2935
    THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P
    Bulletin Number: 09-034-14-2956
    IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO
    Bulletin Number: 09-034-18-3430
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 09-034-18-3430a
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 09-035-17-3080
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co
    Bulletin Number: 09-039-13-2852
    SOME VEHICLES MAY EXHIBIT A CHATTERING NOISE AND THE DRIVER-SIDE SEAT LIFT CANNOT BE ADJUSTED BECAUSE THE LOCK PLATE GUIDE COMES OFF THE GUIDE CAM WHEN OPERATING THE LIFT. IF THE LIFT LEVER IS THEN OPERATED WITH THE LOCK PLATE GUIDE OFF, TH
    Bulletin Number: 09-046-12-2744
    SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM
    Bulletin Number: 092103
    DOORS HARD TO CLOSE IN EXTREMELY COLD WEATHER. *TT
    Bulletin Number: 10
    MAZDA SERVICE PROGRAM #10 - THE MALFUNCTION INDICATOR LIGHT (MIL) MAY ILLUMINATE DURING AN OBD CHECK AT AN INSPECTION/MAINTENANCE (I/M) STATION CAUSING THE VEHICLE TO FAIL THE INSPECTION/MAINTENANCE STATION (I/M) TEST EVEN THOUGH THE VEHICL
    Bulletin Number: 11012005
    INFORMATION DISPLAY FUNCTIONS. *TT
    Bulletin Number: 1303F
    THE CHECK ENGINE LIGHT MAY ILLUMINATE UNDER CERTAIN CONDITIONS AND A DIAGNOSTIC TROUBLE CODE P2404 MAY BE STORED DUE TO IMPROPER PROGRAMMING OF THE POWERTRAIN CONTROL MODULE. AN EMISSION RECALL CAMPAIGN (# 1303F) TO REPROGRAM THE POWERTRAI
    Bulletin Number: 17-04
    A newly established short cord (P/N GAY2-67-SH0) has been released if a connector is broken when performing Recall 9416E.
    Bulletin Number: 60
    SPECIAL SERVICE PROGRAM 60 TO REPLACE THE FAN CONTROL MODULE. COMMUNICATIONS TO MAZDA OWNERS AND DEALERSHIPS; ATTACHMENT II; PRE-NOFICIATION OF RECALL AND ELECTRONIC FIELD COMMUNICATIONS. *TT
    Bulletin Number: MT-003-18
    The Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step Deployment. Standard Deployment is for Mexico spec vehicles and Two-Step Deployment is for US and Canadian spec vehicles.
    Bulletin Number: MT-012-18
    If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or
    Bulletin Number: RF-04-14R4
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: SA-029-19
    Due to a database error discovered with IDS 114.00-114.02 release (which affects Recall 3719F), it will be necessary to uninstall IDS 114 and install IDS 113.00 and 113.06 update. The Recall can be performed after removing IDS 114 and insta
    Bulletin Number: SA-029-19a
    The database error discovered with IDS 114.00-114.02 release has been fixed with IDS 114.04 release and is now available for download.
    Bulletin Number: SA-061-17
    In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En
    Bulletin Number: SA-068-17
    STOPPER PLATES FOR AIR BAG MODULE CONNECTORS HAVE BEEN ESTABLISHED AS NEW SERVICE PARTS. When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do
    Bulletin Number: SA234
    IDS UPDATE 101.00 AND 101.02 IS NOW AVAILABLE ON MS3 UNDER THE "IDS/INFOTAINMENT" TAB.
    Bulletin Number: SA327
    TAKATA RECALLS GENERAL INFORMATION PURPOSE: THIS PAGE WAS CREATED TO ASSIST WITH HANDLING TAKATA AIR BAG RECALLS. PROCESSES: PLEASE USE THESE PROCESS FLOWCHARTS TO PROPERLY HANDLE VEHICLES SUBJECT TO THE TAKATA AIR BAG RECALL. RECALL 82
    Bulletin Number: SB-01-007-09
    MAZDA: VEHICLES MAY EXHIBIT A CONCERN OF UNSTABLE IDLING OR, IN SOME RARE CASES, STALLING, JUST AFTER THE VEHICLE STOPS WITH NO DTCS DETECTED. PROBLEM IS DUE TO THE ACCUMULATION OF CARBON DEPOSITS INSIDE THE THROTTLE BODY CAUSING AIR FLOW
    Bulletin Number: SB-01-015-13
    MAZDA: AFTER THROTTLE BODY HAD BEEN REPLACED, ON CERTAIN VEHICLES, THE MIL WILL ILLUMINATE DUE TO AN ELECTRICAL NOISE, WITHIN THE ENGINE HARNESS THAT IS ABNORMAL. MODEL 2003-2004 MAZDA6. *PE
    Bulletin Number: SB-01-023-10
    MAZDA: DETERMINING EVAPORATIVE SYSTEM LEAK LOCATION FOR DTCS P0441, P0442, P0455, P0455. SOME VEHICLES MAY HAVE A MIL ILLUMINATION WITH DTCS STORED IN MEMORY. *PE UPDATED 4/18/11. *PE
    Bulletin Number: SB-01-028-10
    MAZDA: VARIABLE VALVE TIMING (VVT) NOISE WHEN STARTING ENGINE. WHEN ENGINE IS FIRST STARTED, SOME VEHICLES MAY EXHIBIT A LOUD TICKING NOISE FROM THE VARIABLE VALVE TIMING (VVT) (A). THIS IS CAUSED BY THE LOCK PIN OF THE VARIABLE VALVE TIM
    Bulletin Number: SB-09-005-13
    MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE
    Bulletin Number: SB-09-057-10
    MAZDA: THERE IS CONDENSATION AND FOG IN THE FRONT AND REAR COMBINATION LIGHTS. *RM
    Bulletin Number: SR-7714-F
    MAZDA: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. AN INCREASED COMBUSTION, DURING AIR BAG DEPLOYMENT, IS DUE TO INFLATOR PROPELLANT MATERIAL, THAT WAS IMPROPERLY PROCESSED AND AIR BAG MODULE CAN RUPTURE AND INJURE OCCUPANT(S). MODEL 20
    2003 MAZDA MIATA
    Bulletin Number: 00-001-13-2748
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 00-001-13-2748A
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 00-001-18-3446
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
    Bulletin Number: 00-001-18-3446a
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
    Bulletin Number: 00-001-19-3560
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
    Bulletin Number: 00-002-14-2936
    MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE
    Bulletin Number: 00-002-19-3561
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
    Bulletin Number: 00-003-18-3480
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro
    Bulletin Number: 00-003-18-3480a
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
    Bulletin Number: 00-003-19-3583
    In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
    Bulletin Number: 00-004/12
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 00-004-12-2741
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 00204
    EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH
    Bulletin Number: 00307
    AVAILABILITY OF NON-REQUIRED TOOLS. *KB
    Bulletin Number: 01-001-19-3551
    This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
    Bulletin Number: 01-002-19-3552
    The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
    Bulletin Number: 01-003-15-3014
    USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS.
    Bulletin Number: 01-004-19-3558
    On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
    Bulletin Number: 01-008-18-3451
    This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
    Bulletin Number: 01-009-18-3452
    The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
    Bulletin Number: 01-016-18-3522
    On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
    Bulletin Number: 0102504
    BATTERY TEST PROCEDURE REQUIREMENTS. *TT
    Bulletin Number: 02-001-13-2752
    SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH
    Bulletin Number: 02-001-19-3550
    Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
    Bulletin Number: 02-006-18-3449
    Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
    Bulletin Number: 0500103
    CLUTCH CHATTER DURING COLD TAKEOFF. ON VEHICLES WITH MANUAL TRANSMISSIONS BUILT PRIOR TO 4/10/2003. *TT
    Bulletin Number: 0501202
    6-SPEED MANUAL TRANSMISSION WILL NOT SHIFT INTO 5TH OR REVERSE GEARS. *TT
    Bulletin Number: 07-002-13-2842
    A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS
    Bulletin Number: 07-002-18-3432
    A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c
    Bulletin Number: 07-002-19-3616
    A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is
    Bulletin Number: 0800306
    NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB
    Bulletin Number: 0900104
    PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR
    Bulletin Number: 09-001-16-3113
    IF THE IMMOBILIZER UNIT LC62-67-5G2* OR DC69-67-5G2* NEEDS TO BE REPLACED WITH A NEW ONE, THESE PARTS ARE NO LONGER AVAILABLE. NEW ALTERNATIVE SERVICE PARTS KITS ARE NOW AVAILABLE, INCLUDING ALTERNATIVE IMMOBILIZER UNIT BJ3D-67-5G2L OR TC91
    Bulletin Number: 09-002-19-3554
    This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro
    Bulletin Number: 0900403
    REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE. *TT
    Bulletin Number: 09-005-13-2781
    THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH
    Bulletin Number: 09-005-19-3562
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-
    Bulletin Number: 09-009-19-3566
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 0901304
    RATTLING NOISE FROM DRIVER'S OR PASSENGER'S DOOR WHEN DRIVING ON A ROUGH ROAD OR CLOSING THE DOOR. *TT
    Bulletin Number: 09-014-18-3443
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
    Bulletin Number: 09-014-18-3443a
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-
    Bulletin Number: 09-019-18-3450
    This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
    Bulletin Number: 0902604
    SPEEDOMETER REPLACEMENT PROCEDURE. *TT
    Bulletin Number: 09-027-14-2935
    THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P
    Bulletin Number: 09-034-14-2956
    IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO
    Bulletin Number: 09-034-18-3430
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 09-034-18-3430a
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 09-035-17-3080
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co
    Bulletin Number: 1003E
    EMISSION RECALL CAMPAIGN 1003E - CHECK ENGINE LIGHT MAY ERRONEOUSLY ILLUMINATE AND A DIAGNOSTIC TROUBLE CODE P2404 OR P0456 MAY BE STORED INDICATING A PROBLEM IN THE EMISSIONS CONTROL SYSTEM WHEN NO PROBLEM EXISTS, OR THE CHECK ENGINE LIGHT
    Bulletin Number: MT-012-18
    If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or
    Bulletin Number: SA-061-17
    In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En
    Bulletin Number: SB-09-005-13
    MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE
    2003 MAZDA MILLENIA
    Bulletin Number: 02-001-13-2752
    SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH
    Bulletin Number: 0900104
    PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR
    Bulletin Number: SA-061-17
    In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En
    2003 MAZDA MPV
    Bulletin Number: 00-001-13-2748
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 00-001-13-2748A
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 00-001-18-3446
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
    Bulletin Number: 00-001-18-3446a
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
    Bulletin Number: 00-001-19-3560
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
    Bulletin Number: 00-002-14-2936
    MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE
    Bulletin Number: 00-002-19-3561
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
    Bulletin Number: 00-003-18-3480
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro
    Bulletin Number: 00-003-18-3480a
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
    Bulletin Number: 00-004/12
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 00-004-12-2741
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 00-004-16-3237
    RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNERS MANUAL.
    Bulletin Number: 0004180
    B29 AND LATER POWERTRAIN CONTROL MODULE (PCM) CALIBRATION UPDATE INFORMATION. REPAIR INFORMATION REVIEW1. *TT
    Bulletin Number: 00204
    EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH
    Bulletin Number: 00307
    AVAILABILITY OF NON-REQUIRED TOOLS. *KB
    Bulletin Number: 01-001-19-3551
    This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
    Bulletin Number: 01-002-19-3552
    The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
    Bulletin Number: 01-003-15-3014
    USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS.
    Bulletin Number: 01-004-19-3558
    On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
    Bulletin Number: 01-008-18-3451
    This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
    Bulletin Number: 01-009-18-3452
    The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
    Bulletin Number: 010104
    IT IS POSSIBLE THAT THE SOLDERING STRENGTH ON A TERMINAL IN THE FAN CONTROL MODULE MAY BE INSUFFICIENT, CAUSING A CRACK DURING USE. FAN CONTROL MODULE SPECIAL SERVICE PROGRAM (SSP)60. *NM
    Bulletin Number: 0101203
    TAPPET (TICK) NOISE FROM ENGINE. *TT
    Bulletin Number: 01-016-18-3522
    On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
    Bulletin Number: 0101904
    MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION WITH DIAGNOSTIC TROUBLE CODES (DTCS) P2404 / P0446. *TT
    Bulletin Number: 0102103
    METAL SNAP OR POPPING NOISE FROM ENGINE. *EH
    Bulletin Number: 0102103
    STICK / SLIP NOISE FROM ENGINE. *TT
    Bulletin Number: 0102504
    BATTERY TEST PROCEDURE REQUIREMENTS. *TT
    Bulletin Number: 0103305
    ENGINE NO START IN EXTREME COLD WEATHER. *TT
    Bulletin Number: 0103504
    ENGINE PINGING DURING ACCELERATION AND/OR LIGHT THROTTLE CRUISING. *TT
    Bulletin Number: 0105406
    ENGINE HARD TO START, RUNS ROUGH. *KB
    Bulletin Number: 02-001-13-2752
    SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH
    Bulletin Number: 02-001-19-3550
    Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
    Bulletin Number: 02-006-18-3449
    Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
    Bulletin Number: 0400103
    FRONT BRAKE CLUNKING NOISE. *TT
    Bulletin Number: 0500104
    AUTOMATIC TRANSAXLE MAY EXHIBIT SHIFT SHOCK WHILE THE ENGINE WARMS FROM COLD TO NORMAL. *TT
    Bulletin Number: 0500105
    O/D OFF INDICATOR LIGHT FLASHING / MALFUNCTION INDICATOR LAMP (MIL) WITH DIAGNOSTIC TROUBLE CODE (DTC) P0706. *TT
    Bulletin Number: 0500304
    MAZDA SPECIAL PROGRAM (MSP03) - SHIFT SHOCK - TRANSMISSION CONTROL MODULE (TCM) REFLASH. VEHICLES BUILT FROM 4/1/03 THROUGH 1/26/04. *NJ
    Bulletin Number: 0500603
    MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION WITH DIAGNOSTIC TROUBLE CODE (DTC) P0706. THIS BULLETIN SUPERSEDES 01-023/03 ISSUED 10/15/03. *TT
    Bulletin Number: 05-006-14-2917
    THE VEHICLES AUTOMATIC TRANSAXLE (ATX) MAY EXHIBIT SHIFT SHOCK WHILE THE ENGINE WARMS FROM COLD TO NORMAL OPERATING TEMPERATURE. THE SYMPTOM IS INTERMITTENT, IT DOES NOT OCCUR ALL THE TIME. THE SHIFT SHOCK USUALLY OCCURS DURING 1-2 OR 2-3
    Bulletin Number: 05-007-14-2918
    THE VEHICLES AUTOMATIC TRANSAXLE (ATX) MAY EXHIBIT SHIFT SHOCK WHILE THE ENGINE WARMS FROM COLD TO NORMAL OPERATING TEMPERATURE. THE SYMPTOM IS INTERMITTENT, IT DOES NOT OCCUR ALL THE TIME. THE SHIFT SHOCK USUALLY OCCURS DURING 1-2 OR 2-3
    Bulletin Number: 0700104
    AIR TEMPERATURE OUTPUT DIFFERENCE BETWEEN CENTER DASH VENTS. *MR THIS BULLETIN REPLACED THE PREVIOUS BULLETIN ISSUED ON 02/12/04. *TT
    Bulletin Number: 07-002-13-2842
    A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS
    Bulletin Number: 07-002-18-3432
    A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c
    Bulletin Number: 07-002-19-3616
    A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is
    Bulletin Number: 0700304
    COOLANT SEEPAGE FROM REAR HEATER PIPE. *TT
    Bulletin Number: 0700403
    CORROSION ON REAR HEATER PIPE. *PH WARRANTY EXTENSION. *TT
    Bulletin Number: 0700404
    LACK OF WARM AIR FROM FRONT HEATER. *TT
    Bulletin Number: 0800306
    NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB
    Bulletin Number: 08022004
    DEALER NOTICE - SERVICE BULLETIN RELEASE. *TT
    Bulletin Number: 08262004
    DEALER NOTICE - SERVICE BULLETIN RELEASE - 08/26/2004. *TT
    Bulletin Number: 0900104
    PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR
    Bulletin Number: 09-001/16
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 09-001-16-3113
    IF THE IMMOBILIZER UNIT LC62-67-5G2* OR DC69-67-5G2* NEEDS TO BE REPLACED WITH A NEW ONE, THESE PARTS ARE NO LONGER AVAILABLE. NEW ALTERNATIVE SERVICE PARTS KITS ARE NOW AVAILABLE, INCLUDING ALTERNATIVE IMMOBILIZER UNIT BJ3D-67-5G2L OR TC91
    Bulletin Number: 09-002-19-3554
    This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro
    Bulletin Number: 0900403
    REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE. *TT
    Bulletin Number: 09-005-13-2781
    THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH
    Bulletin Number: 09-005-19-3562
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-
    Bulletin Number: 09-009-19-3566
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 0901105
    POWER WINDOWS INOPERATIVE - BLOWN FUSE. TO INCLUDE 2006 MAZDA MPV. *TT
    Bulletin Number: 0901402
    ACCESSORY REAR CARGO NET HOOKS DETACH. *TT
    Bulletin Number: 0901405
    RATTLING NOISE FROM 2ND-ROW SEATS. *SC
    Bulletin Number: 09-014-18-3443
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
    Bulletin Number: 09-014-18-3443a
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-
    Bulletin Number: 0901904
    LOOSE REAR QUARTER WINDOW GLASS. *MJ
    Bulletin Number: 09-019-18-3450
    This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
    Bulletin Number: 0902604
    SPEEDOMETER REPLACEMENT PROCEDURE. *TT
    Bulletin Number: 0902605
    POWER SLIDING DOOR (PSD) RE-OPENS AFTER STARTING TO CLOSE AND LATCH. *TT
    Bulletin Number: 09-027-14-2935
    THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P
    Bulletin Number: 0902904
    POPPING NOISE FROM FRONT SUSPENSION WHEN DRIVING OVER BUMPS. *TT
    Bulletin Number: 0903304
    REAR COMBINATION LAMP REMOVAL CAUTION. *TT
    Bulletin Number: 09-034-14-2956
    IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO
    Bulletin Number: 09-034-18-3430
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 09-034-18-3430a
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 09-035-17-3080
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co
    Bulletin Number: 0903804
    POWER SLIDING DOOR (PSD) DRIVE MODULE REMOVAL / INSTALLATION PROCEDURES. *TT
    Bulletin Number: 0904004
    POWER SLIDING DOOR (PSD) SYSTEM SERVICE TIPS DUE TO INOPERATIVE OR IMPROPER POWER SLIDING DOOR (PSD) OPERATION. *TT
    Bulletin Number: 2204H
    THE POSITIVE CRANKCASE VENTILATION (PCV) HOSE MAY FAIL, CAUSING ROUGH IDLING AND/OR THE MALFUNCTION INDICATOR LAMP (MIL) TO ILLUMINATE. EMISSION RECALL 2204H LETTER TO DEALER; ATTACHMENT I DEALER INFORMATION; ATTACHMENT II; ATTACHMENT III
    Bulletin Number: MT-012-18
    If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or
    Bulletin Number: RF-18-03
    EXHAUST PIPE GASKET OPEN END: There has been some concern with the open end of hoop design being considered a defect in the gasket for P/N AJ17-40-305. The end of this ?hoop? is intentionally modified to press fix the gasket on the exhaust
    Bulletin Number: SA-061-17
    In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En
    Bulletin Number: SB-09-005-13
    MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE
    2003 MAZDA MX-5
    Bulletin Number: 09-001/16
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    2003 MAZDA PROTEGE
    Bulletin Number: 00-001-13-2748
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 00-001-13-2748A
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 00-001-18-3446
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
    Bulletin Number: 00-001-18-3446a
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
    Bulletin Number: 00-001-19-3560
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
    Bulletin Number: 00-002-14-2936
    MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE
    Bulletin Number: 00-002-19-3561
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
    Bulletin Number: 00-003-18-3480
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro
    Bulletin Number: 00-003-18-3480a
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
    Bulletin Number: 00-003-19-3583
    In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
    Bulletin Number: 00-004/12
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 00-004-12-2741
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 00-004-16-3237
    RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNERS MANUAL.
    Bulletin Number: 0004123
    B28 AND LATER PCM CALIBRATION UPDATE INFORMATION. REPAIR INFORMATION REVIEW1. *TT
    Bulletin Number: 00204
    EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH
    Bulletin Number: 00307
    AVAILABILITY OF NON-REQUIRED TOOLS. *KB
    Bulletin Number: 01-001-19-3551
    This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
    Bulletin Number: 0100207
    WHISTLE NOISE AT IDLE, FUEL CUT UNDER BOOST, MIL ILLUMINATED, DTC P0171 SET. *KB
    Bulletin Number: 01-002-19-3552
    The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
    Bulletin Number: 01-003-15-3014
    USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS.
    Bulletin Number: 0100403
    ENGINE RATTLE NOISE AT 1000 - 3000 RPM COLD ENGINE. *TT
    Bulletin Number: 01-004-19-3558
    On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
    Bulletin Number: 01-008-18-3451
    This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
    Bulletin Number: 0100904
    ENGINE HARD TO START. *MR
    Bulletin Number: 01-009-18-3452
    The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
    Bulletin Number: 0101107
    CONVERTER ASSEMBLY BREAKS AT WELD. *KB
    Bulletin Number: 01-016-18-3522
    On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
    Bulletin Number: 0102203
    HESITATION AND/OR INTERMITTENT STUMBLE UNDER ACCELERATION. *TT UPDATE. *TT
    Bulletin Number: 0102504
    BATTERY TEST PROCEDURE REQUIREMENTS. *TT
    Bulletin Number: 0102803
    MALFUNCTION INDICATOR LIGHT (MIL) ILLUMINATION WITH DIAGNOSTIC TROUBLE CODE (DTC) P0507 STORED IN MEMORY. VARIOUS MODELS INCLUDING THE MP3, AND MAZDASPEED 2001-2003. *TT
    Bulletin Number: 0103406
    WHISTLE NOISE AT IDLE FUEL CUT UNDER BOOST, MIL ILLUMINATED, DTC P0171 SET. *KB
    Bulletin Number: 02-001-13-2752
    SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH
    Bulletin Number: 02-001-19-3550
    Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
    Bulletin Number: 0200303
    A CLUNK/KNOCK NOISE CAN BE HEARD FROM THE REAR STABILIZER BAR WHEN DRIVING OVER UNEVEN ROAD SURFACE SUCH AS SPEED BUMPS. 2001 MP3 PROTEGE & 2003-2003.5 MAZDASPEED PROTEGE. *TT
    Bulletin Number: 02-006-18-3449
    Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
    Bulletin Number: 0500204
    CRACKING OF THE A/T GEAR INDICATOR LETTERING PLATE. MODELS TO INCLUDE ARE MAZDA PROTEGE5 2001-2003. *TT
    Bulletin Number: 06012004
    PROGRAMMABLE MODULE INSTALLATION. ( 2004 MAZDA B SERIES) *JB
    Bulletin Number: 07-002-13-2842
    A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS
    Bulletin Number: 07-002-18-3432
    A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c
    Bulletin Number: 07-002-19-3616
    A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is
    Bulletin Number: 0700503
    A/C SWITCH LIGHT GOES OUT AND / OR FLASHES WITH FAN CONTROL SPEED IN NUMBER 2 POSITION. *PH
    Bulletin Number: 0800306
    NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB
    Bulletin Number: 0900104
    PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR
    Bulletin Number: 0900203
    ROOF RACK CROSS BAR REMOVAL AND INSTALLATION INSTRUCTIONS. *TT
    Bulletin Number: 09-002-19-3554
    This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro
    Bulletin Number: 0900403
    REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE. *TT
    Bulletin Number: 09-005-13-2781
    THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH
    Bulletin Number: 09-005-19-3562
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-
    Bulletin Number: 09-009-19-3566
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 0901404
    UNUSUAL NOISE AND/OR EXCESSIVE EFFORT REQUIRED WHEN OPERATING LIFTGATE. *TT
    Bulletin Number: 09-014-18-3443
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
    Bulletin Number: 09-014-18-3443a
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-
    Bulletin Number: 09-019-18-3450
    This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
    Bulletin Number: 0902604
    SPEEDOMETER REPLACEMENT PROCEDURE. *TT
    Bulletin Number: 09-027-14-2935
    THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P
    Bulletin Number: 09-034-14-2956
    IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO
    Bulletin Number: 09-034-18-3430
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 09-034-18-3430a
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 09-035-17-3080
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co
    Bulletin Number: 3005C
    THE TIGHTENING TORQUE OF THE SCREWS USED FOR MOUNTING THE INTAKE MANIFOLD SHUTTER VALVE MAY HAVE BEEN LOWER THAN THE SPECIFICATION, CAUSING ROUGH IDLING, NOISE AND/OR MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION TO ENGINE MISFIRING ADVERSE
    Bulletin Number: SB-09-005-13
    MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE
    2003 MAZDA PROTEGE 5
    Bulletin Number: 00-003-19-3583
    In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
    Bulletin Number: 07-002-13-2842
    A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS
    Bulletin Number: 07-002-18-3432
    A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c
    Bulletin Number: 07-002-19-3616
    A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is
    Bulletin Number: 09-009-19-3566
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 09-034-14-2956
    IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO
    Bulletin Number: 09-034-18-3430
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 09-034-18-3430a
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 09-035-17-3080
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co
    2003 MAZDA TRIBUTE
    Bulletin Number: 00-001-13-2748
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 00-001-13-2748A
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 00-001-18-3446
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
    Bulletin Number: 00-001-18-3446a
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
    Bulletin Number: 00-001-19-3560
    Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
    Bulletin Number: 00-002-14-2936
    MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE
    Bulletin Number: 00-002-19-3561
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
    Bulletin Number: 00-003-18-3480
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro
    Bulletin Number: 00-003-18-3480a
    Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
    Bulletin Number: 00-003-19-3583
    In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
    Bulletin Number: 00-004/12
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 00-004-12-2741
    MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU
    Bulletin Number: 0004180
    B29 AND LATER POWERTRAIN CONTROL MODULE (PCM) CALIBRATION UPDATE INFORMATION. REPAIR INFORMATION REVIEW1. *TT
    Bulletin Number: 00204
    EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH
    Bulletin Number: 00307
    AVAILABILITY OF NON-REQUIRED TOOLS. *KB
    Bulletin Number: 01-001-19-3551
    This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
    Bulletin Number: 0100204
    CHECK FUEL CAP WARNING LIGHT OR MALFUNCTION INDICATOR LIGHT (MIL) ILLUMINATION WITH DTC P0455/ P0457. *MR
    Bulletin Number: 01-002-19-3552
    The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
    Bulletin Number: 01-003-15-3014
    USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS.
    Bulletin Number: 01-004-19-3558
    On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
    Bulletin Number: 01-008-18-3451
    This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
    Bulletin Number: 01-009-18-3452
    The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
    Bulletin Number: 01012005
    CONDENSATION IN FOG LAMPS, ESPECIALLY IN DAMP OR HUMID WEATHER. *TT
    Bulletin Number: 0101203
    TAPPET (TICK) NOISE FROM ENGINE. *TT
    Bulletin Number: 0101402R
    INTERMITTENT ENGINE QUIT CONDITION. *TT
    Bulletin Number: 0101402R
    SOME VEHICLES EQUIPPED WITH A 3.0L DURATEC ENGINE MAY EXHIBIT AN INTERMITTENT ENGINE QUIT CONDITION. *TT
    Bulletin Number: 0101604
    DIAGNOSTIC TIPS FOR TROUBLESHOOTING COIL-ON-PLUG MISFIRE CONCERNS. *TT THIS BULLETIN SUPERSEDES LAST ISSUED 5/3/04. *TT
    Bulletin Number: 01-016-18-3522
    On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
    Bulletin Number: 0102206
    FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ
    Bulletin Number: 0102504
    BATTERY TEST PROCEDURE REQUIREMENTS. *TT
    Bulletin Number: 0103003
    A MALFUNCTION INDICATOR LAMP (MIL) WITH DIAGNOSTIC TROUBLE CODE (DTC) P0442, P0455, P0456, P0457 OR P1442 OR A CHECK FUEL CAP LIGHT ILLUMINATED WITH DTC P0457. VARIOUS MODELS INCLUDING THE 2005 TRIBUE AND 2004 B-SERIES. *TT
    Bulletin Number: 0103004
    GENERATOR WIRING ROUTING. *TT
    Bulletin Number: 0104706
    NO START, NO CRANK, OR MIL ILLUMINATION WITH ONE OR MORE DTC'S PRESENT. *KB
    Bulletin Number: 0200105
    STEERING DRIFT / PULL - IMPROVED DIAGNOSTIC AND REPAIR PROCEDURE. *TT
    Bulletin Number: 02-001-13-2752
    SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH
    Bulletin Number: 02-001-19-3550
    Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
    Bulletin Number: 0200403
    PREMATURE WEAR AND/OR NOISE FROM THE TIE ROD END ESPECIALLY FROM THE OUTER TIE ROD. *TT
    Bulletin Number: 02-004-13-2770
    SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
    Bulletin Number: 02-004-13-2770A
    SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
    Bulletin Number: 02-004-13-2770B
    SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
    Bulletin Number: 02-004-14
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 02-004-19-3574
    Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road.
    Bulletin Number: 02-006-18-3449
    Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
    Bulletin Number: 02-009-16-3155
    SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
    Bulletin Number: 02-010-18-3477
    Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road.
    Bulletin Number: 02062004
    SELF-TEST PROCEDURE FOR SPEED CONTROL SYSTEM. *MR
    Bulletin Number: 0400204
    EXCESSIVE FRONT BRAKE ROTOR WEAR AND/OR BRAKE DUST ACCUMULATION ON THE FRONT WHEELS. *TT
    Bulletin Number: 0400502
    INADVERTENT DISABLING OF BRAKE SHIFT INTERLOCK. *TT
    Bulletin Number: 0400804
    WHEEL SPEED SENSOR REMOVAL TIP. *TT
    Bulletin Number: 0415
    WINDSHIELD GLASS REPLACEMENT. PARTS FLASH. *TT
    Bulletin Number: 05-001-16-3128
    ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
    Bulletin Number: 05-001-18-3453
    Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
    Bulletin Number: 05-002-13-2777
    ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
    Bulletin Number: 05-002-13-2777A
    ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
    Bulletin Number: 0500504
    AUTOMATIC TRANSAXLE (A/T) INDICATOR LAMP ON (DIAGNOSTIC TROUBLE CODE P1783 AND/OR P0733) OR COLD CLIMATE SHIFT / ENGAGEMENT CONCERNS. UPDATE. *TT
    Bulletin Number: 0500706
    MERCON ATF IS BEING REPLACED BY MERCON V AS A SERVICE FLUID. *KB
    Bulletin Number: 0529
    FRONT OUTER DOOR HANDLE REINFORCEMENT HAS BEEN REDESIGNED. *TS
    Bulletin Number: 0530
    ELECTRIC COOLING FAN ASSEMBLY. *TS
    Bulletin Number: 0600203
    PREMATURE WEAR AND/OR NOISE FROM THE TIE ROD END, ESPECIALLY FROM THE OUTER TIE ROD. *TT
    Bulletin Number: 06012004
    FUEL TANK GAUGE. *JB
    Bulletin Number: 06012004
    METER SET SERVICE TIP. *JB
    Bulletin Number: 06012004
    POP/SNAP NOISE WHILE DRIVING. *JB
    Bulletin Number: 06012004
    PROGRAMMABLE MODULE INSTALLATION. ( 2004 MAZDA B SERIES) *JB
    Bulletin Number: 0800104
    PRETENSIONER DIAGNOSTIC TROUBLE CODES (DTCS) B1877 OR B1881. *MR
    Bulletin Number: 0800105
    PRETENSIONER DIAGNOSTIC TROUBLE CODES (DTCS) B1877, B1881. ORIGINAL NOT RECEIVED. *TT
    Bulletin Number: 0800205
    AIR BAG WARNING LAMP ILLUMINATING INTERMITTENTLY WITH DIAGNOSTIC TROUBLE CODES B1994. *TT
    Bulletin Number: 0800306
    NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB
    Bulletin Number: 0800405
    SAFETY BELT RETRACTS TOO SLOWLY. MAZDA INCLUDING 2006 B-SERIES TRUCKS. *SC
    Bulletin Number: 08062004
    DEALER NOTICE - SERVICE BULLETIN RELEASE 8/6/2004. *TT
    Bulletin Number: 08112004
    DEALER NOTICE - SERVICE BULLETIN RELEASE 8/11/2004. *TT
    Bulletin Number: 0900104
    PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR
    Bulletin Number: 09-002-19-3554
    This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro
    Bulletin Number: 0900403
    REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE. *TT
    Bulletin Number: 09-005-13-2781
    THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH
    Bulletin Number: 09-005-19-3562
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-
    Bulletin Number: 09-009-19-3566
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 0901202
    PASSIVE ANTI-THEFT (PATS) DIAGNOSTIC SERVICE TIPS. *TT
    Bulletin Number: 09-014-18-3443
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
    Bulletin Number: 09-014-18-3443a
    When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-
    Bulletin Number: 0901703
    ELECTRICAL - WIRING - SOLDERING AND CRIMPING REPAIRS - SERVICE TIP. *TT
    Bulletin Number: 09-019-18-3450
    This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
    Bulletin Number: 0902004
    EXTERIOR MIRROR GLASS AND MOTOR REPLACEMENT GUIDELINES. *MJ
    Bulletin Number: 0902604
    SPEEDOMETER REPLACEMENT PROCEDURE. *TT
    Bulletin Number: 09-027-14-2935
    THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P
    Bulletin Number: 09-029-18-3497
    In the event that all vehicle keys are lost and the vehicle key code is not available on the Vehicle Retail Data Inquiry system, replacement keys may only be acquired by obtaining the key code using the Repair Procedure below. Mazda recomme
    Bulletin Number: 09-034-14-2956
    IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO
    Bulletin Number: 09-034-18-3430
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 09-034-18-3430a
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
    Bulletin Number: 09-035-17-3080
    In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co
    Bulletin Number: 13-07R
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: MT-012-18
    If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or
    Bulletin Number: RF0315
    ORDER PROCESS FOR TRIBUTE TRAILER HITCH. *TT
    Bulletin Number: RF-13-07
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: SA-061-17
    In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En
    Bulletin Number: SB-09-005-13
    MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE

     

    Recalls for 2003 Mazda

    2003 MAZDA B-SERIES TRUCK
    NHTSA Campaign ID:VEHICLE SPEED CONTROL:CRUISE CONTROL
    Manufacturer:MAZDA MOTOR CORP
    Manufacture Dates:08/02/2002 - 12/05/2002
    Potential Units Affected:39600

    Defect Description:

    MAZDA IS RECALLING MODEL YEAR 1995 THROUGH 1997 AND MODEL YEAR 2001 THROUGH 2003 TRUCKS EQUIPPED WITH TEXAS INSTRUMENTS SPEED CONTROL DEACTIVATION SWITCH (SCDS) AND/OR ANTI-LOCK BRAKE SYSTEM (ABS) AND MANUFACTURED ON OR BEFORE DECEMBER 5, 2002. A COMPONENT OF THE CRUISE CONTROL DEACTIVATION SWITCH MAY DETERIORATE OVER TIME AND DEVELOP A LEAK. THIS OCCURRENCE COULD CAUSE THE SWITCH TO OVERHEAT, SMOKE OR BURN WHICH COULD RESULT IN AN UNDER HOOD FIRE.

    Consequence:

    A VEHICLE FIRE COULD OCCUR WITH OR WITHOUT THE ENGINE RUNNING.

    Action:

    MAZDA WILL NOTIFY OWNERS THAT DEALERS WILL INSTALL A UNIVERSAL FUSED JUMPER HARNESS ON THE CRUISE CONTROL DEACTIVATION SWITCH FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 11, 2009. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500 OPTION #6.
    2003 MAZDA MAZDA6
    NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
    Manufacturer:Mazda North American Operations
    Manufacture Dates:05/29/2002 - 05/05/2008
    Potential Units Affected:308591

    Defect Description:

    Mazda North America Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2006-2007 Mazdaspeed6 and 2004 MPV vehicles nationwide. Mazda is also recalling 2005-2006 MPV vehicles in Alabama, Arizona, Arkansas, California, Delaware, the District of Columbia, Florida, Georgia, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Virginia, West Virginia, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands. On July 9, 2019 this recall was expanded to include certain 2004-2011 RX-8 vehicles that were previously recalled under 16V-354 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these passenger air bag inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

    Consequence:

    An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

    Action:

    Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began July 6, 2018. Mailing to the affected RX-8 owners began July 6, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 2618F. Note: With the addition of the RX-8 vehicles, this recall fully supersedes recall 16V354.
    2003 MAZDA MAZDA6
    NHTSA Campaign ID:EXTERIOR LIGHTING:FOG LIGHTS
    Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
    Manufacture Dates:10/02/2002 - 05/27/2003
    Potential Units Affected:64000

    Defect Description:

    ON CERTAIN MINI VANS AND PASSENGER VEHICLES, THE SOCKET HOLDER IN THE FOG LIGHTS IS INSTALLED IN THE LAMP CASING USING PRESSURE. DURING OPERATION OF THE FOG LIGHT, THE HEAT FROM THE BULB CAN EXPAND THE SOCKET HOLDER. THE EXPANSION CAN FORCE THE SOCKET HOLDER REARWARD. AFTER REPEATEDLY BEING SUBJECT TO THIS EXPANSION, IF THE FOG LIGHT IS ALSO SUBJECTED TO VIBRATION DURING VEHICLE OPERATION, THE SOCKET HOLDER WITH THE BULB HOLDER AND THE WIRING HARNESS MAY SEPARATE FROM THE FOG LIGHT CASING.

    Consequence:

    SHOULD THIS OCCUR, THE BULB SOCKET AND THE HARNESS CAN DROP INSIDE THE BUMPER AND POSSIBLY BUT RARELY, THE HEAT GENERATED BY THE BULB CAN CAUSE THE BUMPER TO BURN.

    Action:

    DEALERS WILL INSTALL A SPRING TO PREVENT THE SOCKET HOLDER FROM SEPARATING FROM THE LAMP CASE. OWNER NOTIFICATION BEGAN ON JULY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500.
    2003 MAZDA MAZDA6
    NHTSA Campaign ID:PARKING BRAKE:INDICATOR LIGHT
    Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
    Manufacture Dates:10/02/2002 - 05/27/2003
    Potential Units Affected:45600

    Defect Description:

    CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 135, "PASSENGER CAR BRAKE SYSTEMS." DURING PRODUCTION, THE FLOAT IN THE FLUID LEVEL SENSOR IN THE BRAKE RESERVOIR CAN BE FORCED OFF OF THE GUIDE RAIL DURING THE FILLING OF THE MASTER CYLINDER.

    Consequence:

    SHOULD THIS OCCUR, IT IS POSSIBLE THAT THE FLOAT WILL NOT RETURN TO THE GUIDE RAIL AND THE BRAKE FLUID LEVEL WARNING INDICATOR MAY NOT FUNCTION.

    Action:

    MAZDA HAS NOT YET PROVIDED A REMEDY FOR THIS CAMPAIGN. OWNER NOTIFICATION BEGAN JULY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500.
    2003 MAZDA MAZDA6
    NHTSA Campaign ID:FUEL SYSTEM, GASOLINE:DELIVERY
    Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
    Manufacture Dates:10/02/2002 - 08/06/2003
    Potential Units Affected:56700

    Defect Description:

    ON CERTAIN PASSENGER VEHICLES, THE FUEL SENDER UNIT (FSU) MAY HAVE BEEN IMPROPERLY INSTALLED IN THE FUEL TANK, PRODUCING AN INADEQUATE SEAL, AND FUEL MAY LEAK.

    Consequence:

    A FIRE COULD OCCUR IN THE PRESENCE OF AN IGNITION SOURCE.

    Action:

    DEALERS WILL INSPECT THE TOP OF THE FUEL TANK, AND IF NECESSARY, REPAIR OR REPLACE IT. OWNER NOTIFICATION BEGAN FEBRUARY 9, 2004. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500.
    2003 MAZDA MAZDA6
    NHTSA Campaign ID:AIR BAGS:FRONTAL:DRIVER SIDE INFLATOR MODULE
    Manufacturer:Mazda North American Operations
    Manufacture Dates:05/29/2002 - 05/05/2008
    Potential Units Affected:308992

    Defect Description:

    Mazda North American Operations (Mazda) is recalling certain model year 2003-2008 Mazda6, 2004-2008 RX-8, and 2006-2007 Mazdaspeed6 vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture.

    Consequence:

    In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.

    Action:

    Mazda will notify owners, and dealers will replace the driver's frontal air bag inflator with an alternate inflator, free of charge. The recall began on September 12, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1417G. Note: This recall supersedes recall 15V-382.
    2003 MAZDA MIATA
    NHTSA Campaign ID:EXTERIOR LIGHTING:FOG LIGHTS
    Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
    Manufacture Dates:07/10/2000 - 02/28/2003
    Potential Units Affected:64000

    Defect Description:

    ON CERTAIN MINI VANS AND PASSENGER VEHICLES, THE SOCKET HOLDER IN THE FOG LIGHTS IS INSTALLED IN THE LAMP CASING USING PRESSURE. DURING OPERATION OF THE FOG LIGHT, THE HEAT FROM THE BULB CAN EXPAND THE SOCKET HOLDER. THE EXPANSION CAN FORCE THE SOCKET HOLDER REARWARD. AFTER REPEATEDLY BEING SUBJECT TO THIS EXPANSION, IF THE FOG LIGHT IS ALSO SUBJECTED TO VIBRATION DURING VEHICLE OPERATION, THE SOCKET HOLDER WITH THE BULB HOLDER AND THE WIRING HARNESS MAY SEPARATE FROM THE FOG LIGHT CASING.

    Consequence:

    SHOULD THIS OCCUR, THE BULB SOCKET AND THE HARNESS CAN DROP INSIDE THE BUMPER AND POSSIBLY BUT RARELY, THE HEAT GENERATED BY THE BULB CAN CAUSE THE BUMPER TO BURN.

    Action:

    DEALERS WILL INSTALL A SPRING TO PREVENT THE SOCKET HOLDER FROM SEPARATING FROM THE LAMP CASE. OWNER NOTIFICATION BEGAN ON JULY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500.
    2003 MAZDA MPV
    NHTSA Campaign ID:EXTERIOR LIGHTING:FOG LIGHTS
    Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
    Manufacture Dates:11/26/2001 - 02/28/2003
    Potential Units Affected:64000

    Defect Description:

    ON CERTAIN MINI VANS AND PASSENGER VEHICLES, THE SOCKET HOLDER IN THE FOG LIGHTS IS INSTALLED IN THE LAMP CASING USING PRESSURE. DURING OPERATION OF THE FOG LIGHT, THE HEAT FROM THE BULB CAN EXPAND THE SOCKET HOLDER. THE EXPANSION CAN FORCE THE SOCKET HOLDER REARWARD. AFTER REPEATEDLY BEING SUBJECT TO THIS EXPANSION, IF THE FOG LIGHT IS ALSO SUBJECTED TO VIBRATION DURING VEHICLE OPERATION, THE SOCKET HOLDER WITH THE BULB HOLDER AND THE WIRING HARNESS MAY SEPARATE FROM THE FOG LIGHT CASING.

    Consequence:

    SHOULD THIS OCCUR, THE BULB SOCKET AND THE HARNESS CAN DROP INSIDE THE BUMPER AND POSSIBLY BUT RARELY, THE HEAT GENERATED BY THE BULB CAN CAUSE THE BUMPER TO BURN.

    Action:

    DEALERS WILL INSTALL A SPRING TO PREVENT THE SOCKET HOLDER FROM SEPARATING FROM THE LAMP CASE. OWNER NOTIFICATION BEGAN ON JULY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500.
    2003 MAZDA MPV
    NHTSA Campaign ID:EQUIPMENT:OTHER:LABELS
    Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
    Manufacture Dates:11/26/2001 - 06/30/2003
    Potential Units Affected:350

    Defect Description:

    CERTAIN MINIVANS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, "OCCUPANT CRASH PROTECTION." SOME OF THESE VEHICLES WERE PRODUCED WITH AIR BAG WARNING LABELS INTENDED FOR THE CANADIAN MARKET. THUS, THE LABELS CONTAIN WARNINGS IN BOTH ENGLISH AND FRENCH. AS A RESULT, THE AREA OF THE ENGLISH WARNING IS ONLY 16 SQUARE CENTIMETERS, AS OPPOSED TO THE 30 SQUARE CENTIMETERS REQUIRED BY THE STANDARD.

    Consequence:

    Action:

    OWNERS WILL BE PROVIDED WITH AIR BAG CAUTION LABELS AND INSTALLATION INSTRUCTIONS WHICH WERE MAILED ON JULY 22, 2004. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500.
    2003 MAZDA MPV
    NHTSA Campaign ID:EQUIPMENT:OTHER:LABELS
    Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
    Manufacture Dates:08/20/2003 - 05/06/2004
    Potential Units Affected:20000

    Defect Description:

    THE TIRE INFLATION PRESSURE INDICATED ON THE VEHICLE CERTIFICATION LABEL IS NOT CORRECT. THE LABELS SHOW THE MAXIMUM TIRE PRESSURE AS 240 KPA/32 PSI WHEN IT SHOULD BE SHOWN AS 240 KPA/35 PSI. AS A RESULT OF THIS ERROR, THE LOAD RATIOS FOR THE 205/65R15 94H AND THE 215/60R16 95H TIRES EXCEED THE LEVELS PERMITTED BY FMVSS 120.

    Consequence:

    IF THE TIRE IS OPERATED IN AN UNDER-INFLATED CONDITION, THE LOAD CARRYING CAPACITY OF THE VEHICLE MAY BE COMPROMISED, INCREASING THE RISK OF A CRASH.

    Action:

    OWNERS WILL BE PROVIDED WITH A CORRECTED LABEL THAT THEY CAN APPLY TO THEIR VEHICLE, OR THEY CAN HAVE A DEALER INSTALL THE LABEL, IF DESIRED. THE RECALL BEGAN ON JULY 16, 2004. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500, OPTION #4.
    2003 MAZDA MPV
    NHTSA Campaign ID:EXTERIOR LIGHTING:FOG LIGHTS
    Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
    Manufacture Dates:11/12/2001 - 01/21/2003
    Potential Units Affected:5400

    Defect Description:

    ON CERTAIN MINI VANS EQUIPPED WITH FRONT FOG LIGHTS,THE FOG LIGHT BULB SOCKET MAY HAVE BEEN INSTALLED IMPROPERLY.

    Consequence:

    IF THE VEHICLE CONTINUES TO BE USED WITH THIS CONDITION, THE BULB SOCKET AND THE WIRING HARNESS MAY SEPARATE FROM THE FOG LIGHT HOUSING IF EXPOSED TO SHOCK AND/OR VIBRATION AND DROP INSIDE THE BUMPER. SHOULD THIS OCCUR, THE OPERATION OF THE FOG LIGHT MAY THEN CAUSE THE BUMPER TO BURN.

    Action:

    DEALERS WILL INSPECT THE INSTALLATION CONDITION OF THE FOG LIGHT BULB ASSEMBLY, AND REPAIR IT WHEN NECESSARY. OWNER NOTIFICATION BEGAN MARCH 31, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500.
    2003 MAZDA TRIBUTE
    NHTSA Campaign ID:ENGINE AND ENGINE COOLING
    Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
    Manufacture Dates: -
    Potential Units Affected:217500

    Defect Description:

    Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used.

    Consequence:

    A stuck throttle may result in very high vehicle speeds and make it difficult to stop or slow the vehicle, which could cause a crash, serious injury or death.

    Action:

    Mazda will notify owners, and dealers will repair the vehicles by increasing the engine cover clearance, free of charge. Remedy parts are now available. The safety recall began on September 13, 2012. Owners may contact Mazda Customer Assistance Center at 1-800-222-5500, option #6.
    2003 MAZDA TRIBUTE
    NHTSA Campaign ID:LATCHES/LOCKS/LINKAGES:HATCHBACK/LIFTGATE:LOCK
    Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
    Manufacture Dates: -
    Potential Units Affected:49800

    Defect Description:

    CERTAIN 2004-2005 SPORT UTILITY VEHICLES AND CERTAIN 2001-2003 SPORT UTILITY VEHICLE HAVING REAR LIFTGATE COMPONENTS SERVICED WITH 2004 EQUIVALENT COMPONENTS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 206, 'DOOR LOCKS AND DOOR RETENTION COMPONENTS.' THE REAR LIFTGATE LATCHING SYSTEM DOES NOT MEET THE INERTIA LOAD REQUIREMENT IN ONE DIRECTION.

    Consequence:

    IF THE LIFTGATE IS LEFT UNLOCKED, THERE IS THE POTENTIAL THAT IT MAY OPEN DURING A CRASH.

    Action:

    DEALERS WILL REPLACE THE REAR LIFTGATE LATCH RELEASE ROD, THE RELEASE ROD ATTACHMENT CLIP AND THE DOOR HANDLE RETURN SPRING. THE RECALL BEGAN ON MARCH 31, 2005. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500.
    2003 MAZDA TRIBUTE
    NHTSA Campaign ID:VEHICLE SPEED CONTROL:CABLES
    Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
    Manufacture Dates:05/30/2001 - 12/19/2003
    Potential Units Affected:121000

    Defect Description:

    ON CERTAIN SPORT UTILITY VEHICLES, THE ACCELERATOR CABLE MAY PREVENT THE THROTTLE FROM RETURNING TO THE IDLE POSITION.

    Consequence:

    AN UNEXPECTED INCREASE IN ENGINE IDLE SPEED MAY INCREASE STOPPING DISTANCE AND MAY RESULT IN A VEHICLE CRASH.

    Action:

    DEALERS WILL REPLACE THE ACCELERATOR CABLE. THE RECALL BEGAN ON JANUARY 28, 2005. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500, OPTION #4.
    2003 MAZDA TRIBUTE
    NHTSA Campaign ID:VEHICLE SPEED CONTROL:CABLES
    Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
    Manufacture Dates: -
    Potential Units Affected:217500

    Defect Description:

    Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used.

    Consequence:

    A stuck throttle may result in very high vehicle speeds and make it difficult to stop or slow the vehicle, which could cause a crash, serious injury or death.

    Action:

    Mazda will notify owners, and dealers will repair the vehicles by increasing the engine cover clearance, free of charge. Remedy parts are now available. The safety recall began on September 13, 2012. Owners may contact Mazda Customer Assistance Center at 1-800-222-5500, option #6.
    2003 MAZDA TRIBUTE
    NHTSA Campaign ID:STRUCTURE:FRAME AND MEMBERS
    Manufacturer:Mazda North American Operations
    Manufacture Dates:05/22/2000 - 12/19/2003
    Potential Units Affected:109000

    Defect Description:

    Mazda North American Operations (Mazda) is recalling certain model year 2001-2004 Tribute vehicles manufactured May 22, 2000, through December 19, 2003, originally sold, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. These vehicles may experience excessive corrosion at the forward attachment of the lower control arm.

    Consequence:

    A separation of the lower control arm can result in a significant loss of steering control, increasing the risk of a crash.

    Action:

    Mazda will notify owners, and dealers will install a newly designed reinforcement cross-brace, free of charge. The recall began on May 29, 2014. Owners may contact Mazda at 1-800-222-5500. Mazda's number for this recall is 7514D.
    2003 MAZDA TRIBUTE
    NHTSA Campaign ID:POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM, PCM)
    Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
    Manufacture Dates:04/17/2000 - 09/11/2002
    Potential Units Affected:106000

    Defect Description:

    ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH 3.0L V6 DURATEC ENGINES , DURING DECELERATION, THE ENGINE CAN STALL.

    Consequence:

    SHOULD THE ENGINE STALL, A VEHICLE CRASH COULD OCCUR.

    Action:

    DEALERS WILL REPROGRAM THE POWER CONTROL MODULE (PCM) WITH THE APPROPRIATE CALIBRATION. THE RECALL BEGAN ON MAY 3, 2004. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500.
    2003 MAZDA TRIBUTE
    NHTSA Campaign ID:SERVICE BRAKES, HYDRAULIC:ANTILOCK:CONTROL UNIT/MODULE
    Manufacturer:MAZDA MOTOR CORP
    Manufacture Dates:04/17/2000 - 12/19/2003
    Potential Units Affected:95300

    Defect Description:

    ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH ANTILOCK BRAKES (ABS), THE ABS MODULE CONNECTOR MAY HAVE MISSING OR DISLODGED WIRE SEALS. THIS CONDITION COULD ALLOW CONTAMINATION TO ENTER THE MODULE CONNECTOR, CREATING A POTENTIAL FOR AN ELECTRICAL SHORT.

    Consequence:

    AN ELECTRICAL SHORT MIGHT CAUSE AN ABS MALFUNCTION THAT WOULD ILLUMINATE THE ABS WARNING LIGHT, AND IN SOME CASES, THE MODULE MAY OVERHEAT RESULTING IN BURNING ODOR, SMOKE, AND/OR FIRE. THIS CONDITION COULD OCCUR EITHER WHEN THE VEHICLE IGNITION SWITCH IS IN THE OFF POSITION OR WHILE THE VEHICLE IS BEING OPERATED.

    Action:

    DEALERS WILL INSPECT THE WIRE HARNESS CONNECTOR TO THE ABS MODULE FOR MISSING OR DISLODGED WIRE SEALS, AND REPAIR OR REPLACE THE HARNESS CONNECTOR AS APPROPRIATE. THE DEALER WILL ALSO INSPECT THE CONNECTOR ON THE ABS MODULE AND REPLACE IT IF IT IS FOUND TO BE CORRODED OR DAMAGED. THE RECALL BEGAN ON MAY 9, 2007. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500.

*Green Vehicles

Find the Mazda models that are the cleanest and most fuel efficient.
  • The Green Vehicle Guide will help you find the most fuel-efficient Mazda for your needs.

    California emissions requirements differ from the federal requirements, and therefore selecting ALL STATES may produce multiple listings for the same vehicle.

     

     

     

     

*Monthly Payment Calculator

Find a car or truck made by Mazda that fits your budget by using our monthly payment calculator.
  • Make your selections in the boxes below and click the "Generate List" button to see a list of Mazda cars and trucks that fit your monthly budget.